Adaptec 2940UW Bedienerhandbuch PDF herunterladen (Seite 17)

Troubleshooting

How do I use the Hardware Conflict Troubleshooter in Windows 95?

Click the

Start

button, then click

Help

From the Contents

tab, double-click

Troubleshooting

Double-click

If you have a hardware conflict

Follow the step-by-step instructions in the Windows Help

window.

Common Error Messages

“Device connected, but not ready”

The host received no answer when it requested data from an

installed SCSI device.

■

Run SCSI

Select

and set the Send Start Unit Command to

Yes

for the SCSI ID of the SCSI device. (See

Configuring the SCSI

Card 2940UW Pro with SCSISelect

on page 13.)

■

Make sure the SCSI device is set to spin up when the power is

switched on. (See the documentation for the SCSI device.)

“Start unit request failed”

The SCSI Card BIOS was unable to send a Start Unit Command to

the SCSI device, or the SCSI device failed to respond.

■

Run SCSI

Select

and disable the Send Start Unit Command for

the SCSI device. Test the SCSI device using the Verify Disk

Media option of the disk utilities. (See

Using SCSI Disk Utilities

on page 20.)

“Time-out failure during...”

An unexpected time-out occurred.

■

Verify the SCSI bus is properly terminated.

■

Verify all cables are properly connected.

■

Try disconnecting the SCSI device cables from the SCSI card

and then starting the computer. If the computer successfully

restarts, one of the SCSI devices may be defective.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Adaptec 2940UW Bedienerhandbuch Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Adaptec 2940UW