20
SCSI Card 2930U2 User’s Reference
■ BIOS Multiple LUN Support—When set to Yes, the SCSI card
BIOS provides boot support for a SCSI peripheral with multi-
ple LUNs. Leave this setting set to No if your boot device does
not have multiple LUNs.
■ Include in BIOS Scan—When set to Yes, the SCSI card BIOS
includes the peripheral as part of its BIOS scan at bootup.
Advanced Configuration Options
Note:
Do not change the Advanced Host Adapter Settings
unless absolutely necessary.
■ Reset SCSI Bus at IC Initialization—When set to Enabled, the
SCSI card generates a SCSI bus reset during its power-on ini-
tialization and after a hard reset.
■ Extended BIOS Translation for DOS Drives > 1 GByte—
When set to Enabled, provides an extended translation scheme
for SCSI hard disks with capacities greater than 1 GByte. This
setting is necessary only for MS-DOS 5.0 or above; it is not
required for other operating systems.The extended translation
scheme supports disk drives as large as 8 GBytes.
To partition a disk larger than 1 GByte controlled by the SCSI
card BIOS, use the MS-DOS Fdisk command.
Caution:
Back up your disk drives before changing the
translation scheme.
■ Host Adapter BIOS (Configuration Utility Reserves BIOS
Space)—Enables or disables the SCSI card BIOS.
■ Set to Enabled if you boot from a SCSI disk drive con-
nected to the SCSI card.
■ Set to Disabled if the peripherals on the SCSI bus (for
example, CD-ROM drives) are controlled by software driv-
ers and do not need the BIOS.
Kommentare zu diesen Handbüchern