Adaptec AUA-7500 Betriebsanweisung PDF herunterladen (Seite 13)

Installing Your Adaptec Media Reader

6 Connect the USB cable to an internal USB port, following your

computer manufacturer’s instructions, or the instructions that

came with your USB host adapter.

Note: If you don’t have an internal USB port, Adaptec

recommends the Adaptec USB2Connect AUA-5100 PCI

USB 2.0 host adapter.

If you don’t have an internal USB port, you can use the adapter

cable (shown below left) to connect the Adaptec Media Reader

to a 5-pin USB terminal on your motherboard.

Read your motherboard’s documentation to locate the USB

terminal and identify the pin that provides power, then connect

that to Pin 1 (shown above right) on the USB 5-pin connector.

The Table below provides detailed descriptions of the five wires

on the cable converter.

Wire # 5 4 3 2 1

Color Black Black Green White Red

Function

Check your motherboard documentation to ensure that the USB header is

wired according to the information in this Table.

Shield Ground + Data - Data Power (VCC)

USB 5-pin Connector

USB Terminal

on Motherboard

Pin 1 (Red Wire)

Power

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Adaptec AUA-7500 Betriebsanweisung Seite 13