Adaptec 39160 Installationsanleitung PDF herunterladen (Seite 11)

Adaptec SCSI Card 39160

Connecting Internal Ultra/Fast Narrow SCSI Devices

If you have internal Ultra/Fast Narrow SCSI devices with stan-

dard 50-pin connectors, you can connect them to the 50-pin

internal SE Narrow SCSI connector. Follow these steps to connect

the devices:

Locate a 50-pin internal Ultra Narrow SCSI cable.

Plug one end of the cable to the 50-pin internal SE Narrow SCSI

connector, positioned vertically on the right side of the Adaptec

SCSI Card 39160 (refer to the figure on page 1).

Plug the other end of the cable to a terminated Ultra/Fast Narrow

SCSI device.

If you have other Ultra/Fast Narrow SCSI devices, attach them to

the connectors between the two ends of the cable. Be sure these

other devices are

un-terminated

Connect a power cable from your computer’s internal power sup-

ply to each internal device.

Do not connect SCSI devices to more than two of

the three SCSI Channel A connectors at the same time.

AUTION

TEP

39160_OEM_InsGd.book Page 9 Thursday, October 14, 1999 10:18 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

Adaptec 39160 Installationsanleitung Seite 11