Adaptec P2280A Installationsanleitung PDF herunterladen (Seite 11)

English 7

English

Connecting a SCSI Device

Connecting an Internal 16-bit SCSI Device

When connecting an internal SCSI device you should connect the

internal U160 16-bit SCSI cable to the internal U160 16-bit

connector on the adapter card.

1 Connect the internal U160 16-bit SCSI cable to the internal

connector on the SCSI card.

2 Assign an unused SCSI ID to the device. SCSI IDs range from 0 to

15 for wide 16-bit SCSI. The SCSI ID 0 is reserved for the first

SCSI hard disk drive and SCSI ID 7 is reserved for the SCSI

controller (the default for narrow and wide SCSI devices).

The SCSI ID is usually configured with jumpers on the SCSI

device. Refer to the Installation Guide supplied with the device

for information on selecting a SCSI ID.

3 HP SCSI cables have their own terminators. Ensure that the

termination option on all the internal SCSI devices is disabled.

SCSI Terminator

tra

160

(16

bit) SCSI

Cable with 3

68-pin

connector

p2280a.book Page 7 Thursday, May 17, 2001 5:00 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Adaptec P2280A Installationsanleitung Seite 11