Adaptec SATA AND SCSI RAID CONTROLLERS Bedienungsanleitung PDF herunterladen (Seite 103)

C-10

Adaptec Flash Utility (AFU)

b Updating the Flash on Multiple Controllers—To flash the

firmware on multiple controllers, type:

afu update /C <

controller_number_a

>,<

controller_number_b

Where

<controller_number_a>

and

<controller_number_b>

is the number of one of the Adaptec RAID controllers whose

firmware you are updating.

To upgrade controllers 0, 2, and 3 for example, type:

afu update /C 0, 2, 3

c Updating the Flash on All Controllers Simultaneously—To

flash the firmware on all controllers, type:

afu update /C all

Note: The UFI file identifies the appropriate controllers,

so you do not have to worry about flashing the wrong

controller.

8 The AFU prompts you to put in the first firmware disk.

When it detects that the disk is in the drive, the AFU reads the

part of the firmware image contained on the first disk.

9 When prompted, remove the first firmware disk and insert the

second firmware disk.

10 If necessary, repeat Step 9 until the process is complete.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 164 165

Keine Kommentare

Adaptec SATA AND SCSI RAID CONTROLLERS Bedienungsanleitung Seite 103