Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Technical Information PDF herunterladen (Seite 178)

164 MetaFrame Solutions Guide

Microsoft(R) Windows 2000 Kernel Debugger

Version 5.00.2066.1

Symbol search path is:

i386kd: waiting to reconnect...

At this point, the kernel debugger is waiting for user input. You can press

CTRL+C to break into the target computer if it is still running. If the target is

currently stopped at a blue screen, break in occurs automatically. If you have any

problems at this point, press CTRL+R to force a resynchronization between the

host and target computers.

Remote Debug

If you are using a remote debug configuration, I386kd must be executed with the

-m option. The following text is displayed:

Microsoft(R) Windows 2000 Kernel Debugger

Version 5.00.2066.1

Symbol search path is: e:\;e:\mfsymbols

i386kd: waiting to connect...

i386kd: No carrier detect - in terminal mode

In this case, the debugger is in terminal mode, so you can directly send standard at

commands to the host modem. Begin by sending commands to disable hardware

compression, flow control, and error correction. These commands vary from

modem to modem, so consult your modem documentation. The following modem

initialization string is recommended for U.S. Robotics modems:

AT&H0&I0&K0&M0&N6

Once the modem is initialized properly, it must be instructed to dial the phone

number of the target modem. This is accomplished by sending the ATD command

to the modem. For tone dialing phone systems, type ATDTphonenumber, where

phonenumber is the telephone number of the modem connected to the target

system.

Some telephone systems use pulse dialing systems. For pulse dialing systems, type

ATDPphonenumber, where phonenumber is the telephone number of the target

modem.

Assuming the modem connected to the target system is properly configured, the

host modem and target modem establish a connection and assert the data carrier

detect (DCD) signal. Once DCD is detected, terminal mode is disabled and you

are connected to the debugger on the remote target computer.

At this point, the kernel debugger is waiting for user input. You can press

CTRL+C to break into the target computer, if it is still running. If the target is

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 184 185 186

Keine Kommentare

Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Technical Information Seite 178