Adaptec AHA-1520A Wartungshandbuch Seite 20
- Seite / 434
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
aic(7D) Devices SunOS 5.5
NAME aic − low-level module for Adaptec AIC-6360 based ISA host bus adapters
SYNOPSIS aic@ioaddr,0
AVAILABILITY x86
DESCRIPTION The aic module provides low-level interface routines between the common disk/tape I/O
subsystem andAIC-6360 based SCSI (Small Computer System Interface) bus controllers. It
also provides support for the Adaptec AHA-1510A,AHA-1520A, and AHA-1522A SCSI con-
trollers. It supports theAIC-6360 SCSI controller on the Sound Blaster 16 SCSI-2 board but
does not support the audio functions — the sbpro(7D) driver provides these capabilities.
Note that theAHA-1510A board and theSCSI port on the Sound Blaster 16 SCSI-2 board
can only be used as a secondary controller — not a primary (boot) controller.
The aic module can be configured for disk and streaming tape support for one or two
host adapter boards, each of which must be the sole initiator on a SCSI bus.
Autoconfiguration code determines if the adapter is present at the configured address
and determines what types of devices are attached to the adapter.
CONFIGURATION The driver attempts to initialize itself using the information found in the configuration
file, aic.conf.
If multiple boards are configured in a singlesystem, each board must occupy a different
I/O base address in the systemI/O address space. Each board must also be assigned a
different IRQ level.
The AHA-1522 or AHA-1520A controller can be used as a primary boot controller only at
I/O base address 0x340 (unless specialBIOS from Adaptec is procured). Therefore, if a
system installation is performed using aSCSI device (such as aCD-ROM drive) connected
to one of these adapters, the adapter must be configured with I/O base address 0x340.
(The adapter BIOS supports booting from this address only.)
Refer to the AHA-1520A/1522A AT-to-SCSI Host Adapters Installation Guide provided with
the controller for instructions on installation of the adapter and the valid jumper settings.
The default jumper configuration described in the AHA-1520A/1522A AT-to-SCSI Host
Adapters Installation Guide is the recommended configuration for the controller.
FILES /kernel/drv/aic.conf aic device driver configuration file
SEE ALSO driver.conf(4), sysbus(4), sbpro(7D)
NOTES The aic driver does not support direct memory access (DMA).
The aic driver does not support SCSI timeouts.
7D-16 modified 6 Oct 1994
- SunOS Reference Manual 1
- OVERVIEW 3
- SYNOPSIS 4
- PROTOCOL 5
- AVAILABILITY 5
- MT-LEVEL 5
- OPTIONS or 6
- RETURN VALUES 6
- EXAMPLES 7
- ENVIRONMENT 7
- Board Configuration 18
- Configuration 18
- 7I-28 modified 21 Mar 1995 32
- SunOS 5.5 Devices audiocs(7D) 41
- VUIDSFORMAT 42
- VUIDGFORMAT 42
- CDROMREADTOCENTRY 59
- MSF format or 59
- CDROM_LEADOUT Leadout track 59
- CDROM_DATA_TRACK Data track 59
- CDROM_LBA LBA format 60
- CDROM_MSF MSF format 60
- AUDIO_SETINFO ioctl returns 79
- DKIOCG_PHYGEOM 85
- DKIOCGGEOM ioctl( ) 85
- DKIOCG_VIRTGEOM 85
- SCSI only) ∗/ 85
- 7D-92 modified 15 Oct 1994 96
- AIC-7770 SCSI chip 107
- SCSI bus. Auto 107
- FBIOGATTR 114
- FDGETDRIVECHAR 121
- FDSETDRIVECHAR 121
- FDGETSEARCH Not available 121
- FDSETSEARCH Not available 121
- FDCMD_WRITE, FDCMD_READ, and 122
- HDKIOCGDIAG 127
- ISO 9660 format CD 131
- TCP allows 148
- IP options: 152
- CMD_RESET 171
- Device Naming 173
- Convention 173
- Logical Device 174
- Implementation 174
- STREAMS messages on 187
- ASCII NUL character 187
- ON. If none of 188
- EUC line 189
- EUC code set 189
- EUC line discipline 189
- EISA/Micro Channel 212
- Configuration Tips 212
- EISA Board 212
- Configuration and 212
- Auto Configuration 212
- MAX_TGT), otherwise it cannot 213
- Micro Channel Board 214
- EOM before 222
- BSD behavior (optional) b 226
- BSD behavior and no rewind 226
- PROM setting it to some legal 242
- SEE ALSO pcmcia(4) 248
- 7D-244 modified 20 Mar 1995 248
- SAP) with the stream 252
- PCMCIA SRAM/DRAM cards that 253
- IRQ level for which the board 281
- LAN Driver 281
- SEE ALSO dlpi(7P), gld(7D) 300
- 7D-296 modified 25 Aug 1995 300
- SCSI target n 307
- SCSI tape drives 315
- HP-88780), the densities are: 315
- BPI density 315
- SunOS 5.5 Devices st(7D) 317
- Tokens for Parallel 322
- Messages Related To 325
- The Serial Port: 325
- PCMCIA nexus 329
- STREAMS Programming Guide 344
- 7I-340 modified 24 Jan 1995 344
- Session management 350
- (Job Control) 350
- Non-canonical mode 352
- TPI (STREAMS-level) 373
- OSI transport-level model 374
- TI message type 376
- TI. After the tirdwr module 378
- SCSI devices must be closed 387
- VIS_MOVECURSOR 398
- VIS_SETCURSORPOS 398
- FILES below) 412
- CPU board 417
- SunOS 5.5 Devices zs(7D) 419
- STREAMS com 433
Verwandte Produkte und Handbücher für Software Adaptec AHA-1520A
Software Adaptec ULTRA160 Betriebsanweisung
(78 Seiten)
(78 Seiten)
Software Adaptec ASR-2045 Betriebsanweisung
(9 Seiten)
(9 Seiten)
(2 Seiten)
Software Adaptec AVC-2310 Betriebsanweisung
(14 Seiten)
(14 Seiten)
Software Adaptec ICP5045BL Betriebsanweisung
(12 Seiten)
(12 Seiten)
Software Adaptec ASR-52445 Betriebsanweisung
(8 Seiten)
(8 Seiten)
Software Adaptec ASR-2045 Betriebsanweisung
(8 Seiten)
(8 Seiten)
Software Adaptec AHA-1532P Betriebsanweisung
(128 Seiten)
(128 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.172 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern