Adaptec GDTSETUP Installationshandbuch PDF herunterladen (Seite 48)

- the SCSI channel (SCSI) or FCAL port (FCAL)

- which a drive has (the entry I/O processor stands for the according I/O channel of the

ICP Controller. Its default setting is ID 7 for SCSI and ID 125 for FCAL.

- the state of initialization ("i" = initialized)

- the names of the drives

- the state, [RW] = Read + Write, [RO] = Read only, [RM] = Removable

- the gross capacity

- if component of a Logical Drive

Use the cursor keys n and p to highlight the drive you wish to initialize. When a hard disk is

selected with <ENTER>, a new screen is displayed.

You may select the high-lighted menu options. The other options are either not appropria-

te to the type of device (removable hard disk), or currently blocked because of security

reasons (e.g., the drive belongs to an Array Drive)

96&6,3DUDPHWHU,QLWLDOL]H

This option can destroy all data on the hard disk.

If a hard disk is not yet initialized, you have to initialize it first. GDTSETUP copies ICP spe-

cific configuration blocks on the hard disk, a primary block and a mirrored secondary block.

The possible settings are different if you select a SCSI hard disk or a Fibre Channel hard

disk.

With a FCAL hard disk there are only a few settings which are relevant. You should always

check that they are all "Enabled" or "On".

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 92 93

Keine Kommentare

Adaptec GDTSETUP Installationshandbuch Seite 48