Adaptec AHA-2930CU Installationsanleitung PDF herunterladen (Seite 62)

54 Appendix: SCSI information and troubleshooting guide

VIDAR Film Digitizer Installation Guide

Connecting the cable

Note: Attach or remove the SCSI cable carefully to avoid

bending the connector pins. Insert the connector straight into

the SCSI port. Inserting the connector at an angle may damage

the pins. If the pins or cable are damaged, improper SCSI

operation may result.

Note: Before connecting the SCSI cable, be certain that the PC

and digitizer are OFF.

1. Carefully attach the SCSI connector to the digitizer’s SCSI port.

Apply even pressure to avoid bending SCSI connector pins. Do not

force the connectors together.

2. Connect the other end of the cable to the SCSI port on the computer.

WARNING: If the SCSI connector has bent pins, it will damage

the SCSI port in the digitizer. Do not attempt to straighten bent

pins. Discard any SCSI cable with bent pins and replace it with

a new cable.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68

Keine Kommentare

Adaptec AHA-2930CU Installationsanleitung Seite 62