Adaptec USBXchange Betriebsanweisung PDF herunterladen (Seite 6)

User’s Guide: USB

Xchange

•

Connecting to the USB Port

1 After connecting to your SCSI devices, if your computer is not

powered up, then power it up now. Connect the USB connector into

the USB port located on your computer.

2 Make sure the cable ends are firmly connected. Do not force your

connections as this may damage your system or the USBXchange.

Note: The USBXchange receives its +5V power from either the

terminator power line of the attached SCSI device, or if no

termination power is available, it switches automatically to

receive the power from the USB bus.

Connecting to an External USB Hub

1 Connect the external USB hub (purchased separately) to the USB

port of your computer.

Note: To ensure proper operation, Adaptec recommends using only

self-powered hubs (only hubs that receive their power from

an A/C connection). Otherwise, you will need to connect the

USBXchange to an optional power supply. See USBXchange

Power Supply on page 13 for more information.

Attach the USB connector from

the USBXchange to the USB

port on your computer

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Keine Kommentare

Adaptec USBXchange Betriebsanweisung Seite 6