Adaptec ASC39320A-ROHS-KIT Betriebsanweisung Seite 1

Stöbern Sie online oder laden Sie Betriebsanweisung nach Schnittstellenkarten / Adapter Adaptec ASC39320A-ROHS-KIT herunter. Adaptec 39320A-R SCSI Card Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 206
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen

Inhaltsverzeichnis

Seite 1 - USER’S GUIDE

USER’S GUIDEADAPTEC ULTRA320 SCSI CARDS(39320A, 29320A, 29320ALP)U320 UG.book Page 0 Tuesday, September 23, 2003 1:47 PM

Seite 2 - Disclaimer

xAdaptec Ultra320 SCSI Cards User’s Guide3 Configuring the Adaptec SCSI Card with SCSISelect Starting SCSISelect 3-3Exiting SCSISelect 3-4Using SCSISe

Seite 3 - Adaptec Customer Support

9-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Installing Windows NTThe adpu320.sys driver is not embedded on the Windows NT 4.

Seite 4

9-3Installing the SCSI Driver for Windows NT 4.08 To add other host adapters that are not part of the Ultra320 Family, press S and repeat from Step 5

Seite 5

9-4Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Windows NT 4.0 Already Installed To update or install the adpu320.sys driver if

Seite 6

9-5Installing the SCSI Driver for Windows NT 4.0Using Advanced Configuration ParametersAdvanced users may use software parameters to alter the configu

Seite 7

9-6Adaptec Ultra320 SCSI Cards User’s GuideNote: The file hotp320.reg adds Hot-Plug related entries into the NT Registry, including the driver-specifi

Seite 8

9-7Installing the SCSI Driver for Windows NT 4.0To eliminate the Warning message, you must update the Windows NT 4.0 software configuration, described

Seite 9

9-8Adaptec Ultra320 SCSI Cards User’s GuideTo swap adapters:1 Install the driver for the Ultra320 Family host adapter by following the steps in Instal

Seite 10 - SCSISelect

9-9Installing the SCSI Driver for Windows NT 4.0TroubleshootingProblems and SolutionsI made changes to the host adapter configuration and Windows NT 4

Seite 11 - 2003, and XP

9-10Adaptec Ultra320 SCSI Cards User’s Guide If the error message persistsa Restart your computer system to a DOS prompt again and copy the current v

Seite 12

9-11Installing the SCSI Driver for Windows NT 4.06 At the DOS prompt do a change directory to I386. 7 Once you are in the I386 directory, type WinNT /

Seite 13 - OpenServer, and Open Unix

xiContents5 Installing the HostRAID Driver for Windows 2000, 2003, and XP Installing the Device Driver for Windows 5-2Installing the Driver For a Fre

Seite 14 - A Troubleshooting in Windows

10-1100Installing the SCSI Driver for Novell NetWare In this Chapter...This chapter explains how to install the Adaptec Ultra320 SCSI driver adpu320.h

Seite 15 - Contents

10-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Installing NetWareTo install the adpu320.ham driver when you install NetWare, f

Seite 16 - Glossary

10-3Installing the SCSI Driver for Novell NetWareInstalling the Driver When NetWare is Already InstalledTo update or install the adpu320.ham driver wh

Seite 17 - Introduction

10-4Adaptec Ultra320 SCSI Cards User’s GuideLoading the Driver at Server BootupTo automatically load the adpu320.ham at server bootup, the startup.ncf

Seite 18 - ■ Adaptec SCSI Card 39320A

10-5Installing the SCSI Driver for Novell NetWareUsing the Load Command Line OptionsYou can specify several command line options when the driver is lo

Seite 19 - Device Drivers

10-6Adaptec Ultra320 SCSI Cards User’s GuideSample Load CommandsHere is a simple load command with no option switches (if loaded from drive A):load a:

Seite 20 - HostRAID Features

10-7Installing the SCSI Driver for Novell NetWare3 Select the removable-media device. The following drive status items appear: Mount StatusMounting ca

Seite 21 - Storage Management Software

10-8Adaptec Ultra320 SCSI Cards User’s GuideUsing the NetWare Tape BackupIncluded with Novell NetWare is a server-based tape backup utility called sba

Seite 22 - Operating Systems

10-9Installing the SCSI Driver for Novell NetWareUsing a CD with NetWareNetWare 5.x and 6.xTo use a CD with NetWare 5.x and 6.x:1 Load adpu320.ham by

Seite 23 - System Requirements

10-10Adaptec Ultra320 SCSI Cards User’s GuideTroubleshootingError MessagesThe error messages listed below are the messages associated with the adpu320

Seite 24 - SCSI IDs

xiiAdaptec Ultra320 SCSI Cards User’s Guide8 Installing the SCSI Driver For Windows 2000/2003 and XP Installing the Driver When Installing Windows 8-2

Seite 25 - Terminating the SCSI Bus

10-11Installing the SCSI Driver for Novell NetWare[xxxxx085] Unable to allocate memory This indicates that there may be a problem with the amount of m

Seite 26 - Defining RAID

10-12Adaptec Ultra320 SCSI Cards User’s Guide[xxxxx0ac] Driver already loaded for all host bus adaptersThe driver is already loaded for all the suppor

Seite 27 - Supported RAID Levels

11-111Installing the SCSI Driver for UnixWare, OpenServer, and Open UnixIn this Chapter...This chapter explains how to install the Adaptec Ultra320 SC

Seite 28 - Card and SCSI Devices

11-2Adaptec Ultra320 SCSI Cards User’s GuideIf you are performing a first time UnixWare/Open Unix installation, see Installing the Driver When Install

Seite 29 - Using SCSI Devices

11-3Installing the SCSI Driver for UnixWare, OpenServer, and Open Unix4 If you have additional HBA disks, insert the next HBA disk, select Install Ano

Seite 30

11-4Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When UnixWare/Open Unix is Already InstalledTo update or install the adpu320 driver

Seite 31

11-5Installing the SCSI Driver for UnixWare, OpenServer, and Open UnixBack Up the Kernel If you have not already done so, back up all important files

Seite 32

11-6Adaptec Ultra320 SCSI Cards User’s Guide4 Type mail and press Enter. The mail messages tell you if the installation was successful.If a mail messa

Seite 33

11-7Installing the SCSI Driver for UnixWare, OpenServer, and Open Unix2 When the kernel has been built, type the following and press Enter after each

Seite 34 - Connecting the LED Connector

11-8Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Installing OpenServer To install the ad320 driver at the same time you install

Seite 35 - Adaptec SCSI Card 29320A

xiiiContentsTroubleshooting 9-9Problems and Solutions 9-9Error Messages 9-1110 Installing the SCSI Driver for Novell NetWare Installing the Driver Whe

Seite 36 - Connecting SCSI Devices

11-9Installing the SCSI Driver for UnixWare, OpenServer, and Open UnixUsing UnixWare/Open Unix and the Host AdapterThis section contains useful inform

Seite 37

11-10Adaptec Ultra320 SCSI Cards User’s Guide UnixWare/Open Unix/OpenServer supports auto-configuration. When adding multiple host adapters to an exi

Seite 38

11-11Installing the SCSI Driver for UnixWare, OpenServer, and Open UnixTroubleshooting Problems and SolutionsMy computer crashes or displays panic mes

Seite 39 - Adaptec SCSI Card 29320ALP

11-12Adaptec Ultra320 SCSI Cards User’s GuideError Messages The error messages listed below are the messages associated with the drivers. Messages are

Seite 40 - Terminated Device

11-13Installing the SCSI Driver for UnixWare, OpenServer, and Open Unix[xxxxx020] Adapter or target device not responding or not connectedThe target d

Seite 41 - Maximum Cable Lengths

11-14Adaptec Ultra320 SCSI Cards User’s Guide[xxxxx041] Command aborted[xxxxx042] Command aborted[xxxxx043] Command aborted [xxxxx044] Command aborted

Seite 42 - Configuring the Adaptec

11-15Installing the SCSI Driver for UnixWare, OpenServer, and Open Unix[xxxxx096] Adapter hardware initialization failure - possible resource conflict

Seite 43

12-112Installing the SCSI Driver for Sun SolarisIn this Chapter...This chapter explains how to install the Adaptec Ultra320 driver for Solaris 9.Insta

Seite 44 - Starting SCSISelect

12-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Installing Solaris 9To install Solaris 9 with an Ultra320 SCSI Host Adapter: 1

Seite 45 - Using SCSISelect Settings

12-3Installing the SCSI Driver for Sun Solaris6 Press F2 again to load all the identified devices. Follow Sun’s installation documentation to finish t

Seite 46 - Options – BBS Systems Only

xivAdaptec Ultra320 SCSI Cards User’s GuideUsing Multiple Host Adapters With UnixWare/Open Unix/OpenServer 11-9Removing the Driver 11-10Troubleshootin

Seite 47

12-4Adaptec Ultra320 SCSI Cards User’s Guide7 Verify if the newly installed Ultra320 driver is on your system and you have the correct version by typi

Seite 48

12-5Installing the SCSI Driver for Sun SolarisRemoving the Driver From Solaris 9If you no longer need the driver, you can use the following procedure

Seite 49

12-6Adaptec Ultra320 SCSI Cards User’s GuideAdditional Notes Known/Unresolved or FYI IssuesExternal RAID Enclosure Configuration:1 Edit /kernel/drv/sg

Seite 50

13-113Installing the SCSI Driver for LinuxIn this Chapter...This chapter explains how to install the Adaptec Ultra320 SCSI driver for the following Li

Seite 51

13-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Device Drivers for Red Hat Linux To install the device drivers for Red Hat Linux 8.0, 9.0,

Seite 52 - HostRAID Options

14-114Installing Adaptec Storage Manager–Browser EditionIn this Chapter...This chapter discusses the installation procedure for installing Adaptec Sto

Seite 53

14-2Adaptec Ultra320 SCSI Cards User’s GuideSupported BrowsersTo run Adaptec Storage Manager, your computer must have a Web browser supporting JavaScr

Seite 54 - ■ SCSI Device Configuration

14-3Installing Adaptec Storage Manager–Browser Edition Compact—Installs only the components required on a remotely managed system. See Managed System

Seite 55

14-4Adaptec Ultra320 SCSI Cards User’s Guide9 When you see the Setup Information, click Next.The Setup Status window shows progress using a scroll bar

Seite 56

14-5Installing Adaptec Storage Manager–Browser EditionConfiguring Internet Explorer for Local ManagementWhen using the High security setting, you must

Seite 57 - Using SCSI Disk Utilities

xvContentsB Windows Error Messages Error Messages B-1Driver Error Messages B-2C Using Windows Advanced Configuration Parameters Using Windows SCSI Par

Seite 58

14-6Adaptec Ultra320 SCSI Cards User’s GuideConfiguring Internet Explorer for Remote ManagementIf you know the IP address of the system you want to ma

Seite 59

14-7Installing Adaptec Storage Manager–Browser EditionInstalling Adaptec Storage Manager on LinuxNote: When performing this installation, keep in mind

Seite 60

14-8Adaptec Ultra320 SCSI Cards User’s Guide9 Click OK.The Shell window you used to launch the installation indicates that some daemons are being star

Seite 61 - Using the SCSISelect Utility

14-9Installing Adaptec Storage Manager–Browser Edition2 Enter the host name or IP address of the system you want to manage and the username and passwo

Seite 62

A-1ATroubleshooting in WindowsIn this Appendix...Most problems for Windows can be resolved by following the recommendations in the Troubleshooting Che

Seite 63 - 39320A at slot 6, 00:0E:00

A-2Adaptec Ultra320 SCSI Cards User’s GuideTroubleshooting ChecklistMost problems with using the Adaptec SCSI Card results from errors in preparing an

Seite 64

A-3Troubleshooting in WindowsGeneral TroubleshootingThe following procedures can be used for troubleshooting in all the Windows operating systems. For

Seite 65 - Creating Arrays

A-4Adaptec Ultra320 SCSI Cards User’s GuideWhat if I have devices that are showing up at the wrong speed (usually slower) when the BIOS scans the SCSI

Seite 66 - ■ RAID-10

A-5Troubleshooting in WindowsWhat do I do if I am having a resources conflict?Physically move the Adaptec SCSI card to another PCI slot. It may be nec

Seite 67 - Creating RAID 0 Arrays

A-6Adaptec Ultra320 SCSI Cards User’s GuideCommon Error MessagesHere is what you should do if the following messages appear on the screen at bootup:“D

Seite 68 - Creating RAID 1 Arrays

xviAdaptec Ultra320 SCSI Cards User’s GuideF Migrating from HostRAID to Adaptec Ultra320 SCSI Migrating With Windows 2000 F-2Installing the Adaptec Ul

Seite 69 - Creating RAID 10 Arrays

B-1BWindows Error MessagesIn this Appendix...Error MessagesError messages generated by the Windows drivers can be viewed by opening the Windows Event

Seite 70 - Are you sure?

B-2Adaptec Ultra320 SCSI Cards User’s Guide3 Click the Words option.In the Data section of the dialog box, the entry in the second row and second colu

Seite 71 - Adding a Spare Drive

B-3Windows Error Messages[xxxxx021] Target device protocol errorAn unexpected event occurred during data transfer between the adapter and target devic

Seite 72 - Rebuilding Arrays

B-4Adaptec Ultra320 SCSI Cards User’s Guide[xxxxx089] Unable to allocate memoryThis indicates that there may be a problem with the amount of memory in

Seite 73 - Verifying Data Integrity

C-1CUsing Windows Advanced Configuration ParametersIn this Appendix...Advanced users may use software parameters to alter the configuration of the Win

Seite 74

C-2Adaptec Ultra320 SCSI Cards User’s GuideThe following is a table of supported Windows Registry Settings. Using Windows SCSI ParametersFollow the in

Seite 75 - Check Point

C-3Using Windows Advanced Configuration Parameters MaximumLogicalUnit—This can limit the scan for connected devices on the SCSI bus. Valid values are

Seite 76 - Driver for Windows 2000

C-4Adaptec Ultra320 SCSI Cards User’s Guide9 Select Add Value from the Edit menu. In the Value Name edit box, enter one of the valid parameter values.

Seite 77

C-5Using Windows Advanced Configuration ParametersTo enter driver-specific parameters:1 Select Run from the Start button.2 Type regedt32 and press Ent

Seite 78 - 2003 is Already Installed

D-1DCreating Driver Floppy DisksIn this Appendix...This Appendix lists the driver installation options for each operating system and instructions for

Seite 79

1-11IntroductionIn this Chapter...This User’s Guide provides information about using the Adaptec SCSI Card and SCSI devices, troubleshooting, SCSI ter

Seite 80 - Configuration Notes

D-2Adaptec Ultra320 SCSI Cards User’s GuideInstallation OptionsSome operating systems only allow the use of floppy disks to supply driver files. The o

Seite 81 - Driver for Windows NT 4.0

D-3Creating Driver Floppy DisksRunning Windows To create the driver disk for all operating systems:1 Insert the Adaptec Installation CD into your CD-R

Seite 82

D-4Adaptec Ultra320 SCSI Cards User’s Guide4 Extract the driver package by typing:dd if=/mnt/packages/FMS/OpenUnix_8/image/driver.img of=/dev/rdsk/f03

Seite 83

D-5Creating Driver Floppy DisksRunning Linux To create the driver disk for Red Hat or SuSE Linux:1 Insert the Adaptec Installation CD.2 At at the root

Seite 84 - If Windows NT 4.0 Setup Hangs

D-6Adaptec Ultra320 SCSI Cards User’s GuideIf You Do Not Have Access to a Preinstalled SystemTo create the driver disk for all operating systems:1 Set

Seite 85

E-1EMigrating From Adaptec Ultra320 SCSI to HostRAIDIn this Appendix...After installing the Adaptec Ultra320 SCSI drivers, you may want to enable Host

Seite 86 - Driver for Linux

E-2Adaptec Ultra320 SCSI Cards User’s GuideMigrating With Windows 2000Installing the HostRAID DriverTo migrate the boot channel on a SCSI card from SC

Seite 87 - Installing Red Hat Linux

E-3Migrating From Adaptec Ultra320 SCSI to HostRAID14 Click Next again. You may be prompted with this warning message:“The software you are about to i

Seite 88 - Installing SuSE Linux

E-4Adaptec Ultra320 SCSI Cards User’s GuideCompleting the HostRAID Driver InstallationAfter you have installed the HostRAID driver and enabled HostRAI

Seite 89

E-5Migrating From Adaptec Ultra320 SCSI to HostRAIDMigrating With Windows XPInstalling the HostRAID DriverTo migrate the boot channel on a SCSI card f

Seite 90 - For Windows 2000/2003

1-2Adaptec Ultra320 SCSI Cards User’s GuideNote: Read the Installation Guide for your Adaptec SCSI Card if you need instructions on installing the SCS

Seite 91

E-6Adaptec Ultra320 SCSI Cards User’s Guide13 You may be prompted with this warning message:“The software you are installing for this hardware: Adapte

Seite 92

E-7Migrating From Adaptec Ultra320 SCSI to HostRAID2 At the Welcome to the Found New Hardware Wizard window, select Next.3 Select Install the software

Seite 93

E-8Adaptec Ultra320 SCSI Cards User’s Guide7 From the Install Driver window, select the the Adaptec HostRAID U320 Driver for Windows NT 4 from the lis

Seite 94

E-9Migrating From Adaptec Ultra320 SCSI to HostRAID3 When the message Are you sure you want to remove this driver? appears, Click Yes and restart the

Seite 95

F-1FMigrating from HostRAID to Adaptec Ultra320 SCSIIn this Appendix...If after installing the HostRAID drivers, you decide to use your controller as

Seite 96

F-2Adaptec Ultra320 SCSI Cards User’s GuideMigrating With Windows 2000Installing the Adaptec Ultra320 SCSI DriverTo migrate the boot channel on HostRA

Seite 97

F-3Migrating from HostRAID to Adaptec Ultra320 SCSI14 Click Next again. You may be prompted with this warning message:“The software you are about to i

Seite 98

F-4Adaptec Ultra320 SCSI Cards User’s Guide8 Repeat Steps 4 through 7 if there is another array. You will also need to delete any spares.9 Once all th

Seite 99

F-5Migrating from HostRAID to Adaptec Ultra320 SCSI4 When the driver is copied on the hard disk drive, click Finish.5 You will be prompted to restart

Seite 100 - Windows NT

F-6Adaptec Ultra320 SCSI Cards User’s Guide9 Click on the path D:\drivers\windows\win32bit or D:\drivers\windows\win64bit (where D: is the CD-ROM driv

Seite 101

1-3Introduction Adaptec SCSI Card 29320A SCSI Channel (SE) —has two internal connectors. SCSI Channel (Ultra320)—has one internal connector and one

Seite 102 - Already Installed

F-7Migrating from HostRAID to Adaptec Ultra320 SCSI4 Select the array by scrolling to it and pressing Enter. This will display the members of that arr

Seite 103 - Hot-Plug PCI Support

F-8Adaptec Ultra320 SCSI Cards User’s Guide3 At the Please select the best match... window, keep the default drive that is highlighted and click Next.

Seite 104 - Removing a Host Adapter

F-9Migrating from HostRAID to Adaptec Ultra320 SCSIDisabling HostRAID SupportAfter installing the HostRAID driver, you must disable HostRAID support b

Seite 105 - Swapping a Host Adapter

F-10Adaptec Ultra320 SCSI Cards User’s Guide13 Press Esc, save change, then exit.If you are using a dual channel card, select Channel B and repeat the

Seite 106

Glossary-1GlossaryAA TermA definition array Two or more disks configured to appear as a single disk to the host system.array controllerThe electronic

Seite 107 - Troubleshooting

Glossary-2Adaptec Ultra320 SCSI Cards User’s Guidecheck pointA feature that enables you to exit the SCSISelect utility when an operation is in progres

Seite 108

Glossary-3GlossaryeventA notification or alert from the system indicating that a change has occurred.event logA file used to maintain information abou

Seite 109 - Error Messages

Glossary-4Adaptec Ultra320 SCSI Cards User’s GuideIinitialized arrayAn array that is ready for data reads and writes.Llogical deviceA read/write resou

Seite 110 - Installing the SCSI Driver

Glossary-5Glossaryphysical resourcesThe Adaptec Family Adapter products, channels, and SCSI devices installed in the server.pollA validation of discov

Seite 111 - NetWare 5.1 and 6.x

Glossary-6Adaptec Ultra320 SCSI Cards User’s GuideSSCSIStands for Small Computer System Interface. A parallel interface standard used to connect vario

Seite 112 - Installed

iiCopyright© 2003 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in an

Seite 113

1-4Adaptec Ultra320 SCSI Cards User’s GuideHostRAID on Adaptec SCSI CardsHostRAID is a product that adds entry-level RAID functionality to SCSI ASICs

Seite 114

Glossary-7Glossarystriping, disk; striped arraySpreading data over multiple disks to enhance performance. Often referred to as RAID 0, simple data str

Seite 115 - Using Removable Media

Index-1IndexAAdaptec customer support iiiAdaptec Storage Manager-Browser Editioncustom and compact installations 14-2defining 1-4installing on Linu

Seite 116

Index-2Adaptec Ultra320 SCSI Cards User’s Guideextended Interrupt 13h translation3-10FFault-tolerant redundancy 1-10HHostRAIDdefining 1-4enabling 4

Seite 117 - Using the NetWare Tape Backup

Index-3Indextroubleshooting 10-10tsa.nlm 10-8using a CD-ROM 10-9OOpen Unixbooting 11-6command syntax 11-4driver installation 11-2 to 11-7kernel

Seite 118 - Optimizing Performance

Index-4Adaptec Ultra320 SCSI Cards User’s Guidegeneral guidelines 1-8listing 3-16SCSISelect 3-12, 3-16, 3-19changing device settings 3-16configurat

Seite 119

Index-5IndexVVerifying a build 4-13Viewing array 4-5WWide negotiation 3-6Windows 2000driver installation 5-2 to 5-3,8-2error messages 8-9install

Seite 120

RAdaptec, Inc.691 South Milpitas BoulevardMilpitas, CA 95035 USA© 2003 Adaptec, Inc.All rights reserved. Adaptec and the Adaptec logo are trademarks o

Seite 121

1-5Introduction Support for transparent array (data) migration to Adaptec Intelligent RAID cards Supports Hot Swap of drives Support for Auto Rebui

Seite 122

1-6Adaptec Ultra320 SCSI Cards User’s GuideOperating SystemsNote: If you want to migrate between the HostRAID and Standalone SCSI drivers, see Appendi

Seite 123 - Open Unix

1-7Introduction Windows XP Linux Red Hat 8.0 and 9.0 Red Hat Advanced Server 2.1 SuSE 8.1 and 8.2 SuSE Enterprise 8Note: Visit www.adaptec.com f

Seite 124

1-8Adaptec Ultra320 SCSI Cards User’s GuideUnderstanding SCSISCSI (pronounced “scuzzy”) stands for Small Computer Systems Interface. SCSI is an indust

Seite 125

1-9Introduction On both SCSI buses (channels) the Adaptec SCSI Card is preset to SCSI ID 7 and should not be changed. This gives the card the highest

Seite 126 - Load the Package

1-10Adaptec Ultra320 SCSI Cards User’s Guide Termination on SE internal SCSI devices is usually controlled by manually setting a jumper or a switch o

Seite 127 - Modify the New System File

1-11IntroductionSupported RAID Levels HostRAID includes a BIOS Configuration Utility for boosting disk performance and data protection. Adaptec SCSI C

Seite 128 - Boot the New Kernel

2-12Using the Adaptec SCSI Card and SCSI DevicesIn this Chapter...This section provides useful information on using the Adaptec SCSI Card and your SCS

Seite 129 - OpenServer

2-2Adaptec Ultra320 SCSI Cards User’s GuideUsing SCSI DevicesIf you connect SCSI devices (such as scanners, tape drives, zip drives, etc.) to your Ada

Seite 130 - Using Tunable Parameters

iiiAdaptec Customer SupportIf you have questions about installing or using your Adaptec product, check this document first—you will find answers to mo

Seite 131 - Removing the Driver

2-3Using the Adaptec SCSI Card and SCSI DevicesUsing Ultra320/Ultra160 Hard Disk Drives For the dual-channel cards, Adaptec recommends that you conne

Seite 132

2-4Adaptec Ultra320 SCSI Cards User’s GuideAdaptec SCSI Card 29320AThe following is a figure of the Adaptec SCSI Card 29320A. Adaptec SCSI Card 29320A

Seite 133

2-5Using the Adaptec SCSI Card and SCSI DevicesWhen you install an Adaptec SCSI Card and SCSI disk drives in a computer that boots from a non-SCSI dis

Seite 134

2-6Adaptec Ultra320 SCSI Cards User’s GuideInstalling Multiple SCSI Cards You can install multiple SCSI cards in your computer; you are limited only

Seite 135

2-7Using the Adaptec SCSI Card and SCSI DevicesConnecting the LED Connector(Optional feature) Most computers have an LED disk activity light on the fr

Seite 136

2-8Adaptec Ultra320 SCSI Cards User’s GuideAdaptec SCSI Card 39320ATo manually terminate Channel A, place a shunt on jumper J5. To manually terminate

Seite 137

2-9Using the Adaptec SCSI Card and SCSI DevicesAdaptec SCSI Card 29320ALPTo manually terminate the channel on the Adaptec SCSI card 29320ALP, place a

Seite 138

2-10Adaptec Ultra320 SCSI Cards User’s GuideAdaptec SCSI Card 39320AThe following figure shows Ultra320/Ultra160 and Ultra2 SCSI devices connected to

Seite 139

2-11Using the Adaptec SCSI Card and SCSI DevicesThe following figure shows LVD SCSI devices on Channel A and non-LVD SCSI devices on Channel B.Adaptec

Seite 140 - /reconfigure file by typing:

2-12Adaptec Ultra320 SCSI Cards User’s GuideThe following figure shows LVD SCSI (Ultra320/Ultra160 and Ultra2) devices connected to the internal and e

Seite 141 - Command Line Options

ivEurope Visit our Web site at www.adaptec-europe.com. German: To speak with a Technical Support Specialist, call +49 89 43 66 55 22, Monday to Frid

Seite 142 - Additional Notes

2-13Using the Adaptec SCSI Card and SCSI DevicesThe following example shows SCSI devices connected to the internal connector. The following example sh

Seite 143

2-14Adaptec Ultra320 SCSI Cards User’s GuideMaximum Cable LengthsThe total length of cabling (internal and external) on the SCSI bus cannot exceed the

Seite 144

3-13Configuring the Adaptec SCSI Card with SCSISelectIn this Chapter...SCSISelect, which is included with the Adaptec SCSI Card, enables you to change

Seite 145 - Manager–Browser Edition

3-2Adaptec Ultra320 SCSI Cards User’s GuideThe default settings are appropriate for most systems and should not be changed. Run SCSISelect if you need

Seite 146 - Supported Browsers

3-3Configuring the Adaptec SCSI Card with SCSISelectStarting SCSISelectTo start SCSISelect:1 Turn on or restart your computer.During the startup proce

Seite 147 - Autorun

3-4Adaptec Ultra320 SCSI Cards User’s GuideExiting SCSISelectTo exit SCSISelect:1 Press Esc until a message prompts you to exit (if you changed any se

Seite 148

3-5Configuring the Adaptec SCSI Card with SCSISelectBoot Device Configuration Options – BBS Systems Only Select Master SCSI Controller—Enables you to

Seite 149

3-6Adaptec Ultra320 SCSI Cards User’s GuideSCSI Device Configuration OptionsSCSI Device Configuration options can be set individually for each connect

Seite 150

3-7Configuring the Adaptec SCSI Card with SCSISelect QAS—(Default:Ye s) Quick Arbitration and Selection reduces the overhead of control release on th

Seite 151

3-8Adaptec Ultra320 SCSI Cards User’s GuideThe following options have no effect if the SCSI card BIOS is disabled. (The SCSI card BIOS is normally ena

Seite 152 - Logging On

vLimited 5-Year Hardware Warranty1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from defects in material

Seite 153

3-9Configuring the Adaptec SCSI Card with SCSISelect Extended INT 13 Translation for DOS Drives > 1 GByte—(Default: Enabled) When set to Enabled,

Seite 154 - Troubleshooting in

3-10Adaptec Ultra320 SCSI Cards User’s Guide SCSI Controller INT 13 Support—(Default: Enabled) This option controls the state of the BIOS at POST tim

Seite 155 - Troubleshooting Checklist

3-11Configuring the Adaptec SCSI Card with SCSISelect Support Removable Disks Under INT 13 as Fixed Disks—(Default: Disabled) Determines which remova

Seite 156 - General Troubleshooting

3-12Adaptec Ultra320 SCSI Cards User’s GuideChanging Configuration SettingsThe factory default settings for the Adaptec SCSI Card are correct for most

Seite 157

3-13Configuring the Adaptec SCSI Card with SCSISelectThe Configuration menu appears. The Configuration menu displays the current settings for the SCSI

Seite 158

3-14Adaptec Ultra320 SCSI Cards User’s GuideIf you select Boot Device Configuration, the Boot Device Configuration menu appears. The non-BBS version i

Seite 159 - Common Error Messages

3-15Configuring the Adaptec SCSI Card with SCSISelectNote: Default settings are always marked with an asterisk. You can press F6 to return all setting

Seite 160 - Windows Error Messages

3-16Adaptec Ultra320 SCSI Cards User’s GuideIf you select Advanced Configuration Options, the Advanced Configuration Options menu appears. To change a

Seite 161 - Driver Error Messages

3-17Configuring the Adaptec SCSI Card with SCSISelectTo view the SCSI IDs:1 Start SCSISelect. See Starting SCSISelect on page 3-3.SCSISelect detects a

Seite 162

3-18Adaptec Ultra320 SCSI Cards User’s GuideVerifying or Formatting a Disk SCSISelect includes a utility that enables you to format and verify disks:

Seite 163

viAdaptec Software License AgreementPLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHE

Seite 164 - Configuration Parameters

3-19Configuring the Adaptec SCSI Card with SCSISelectTo use SCSISelect to format or verify a disk:1 Start SCSISelect. See Starting SCSISelect on page

Seite 165 - Using Windows SCSI Parameters

4-14Using the SCSISelect Utility to Manage ArraysIn this Chapter...With SCSISelect, you can create and maintain RAID arrays when you enable the HostRA

Seite 166

4-2Adaptec Ultra320 SCSI Cards User’s GuideHostRAID supports the following RAID levels: RAID 0—Striping mode for boosting performance. RAID 1—Mirro

Seite 167

4-3Using the SCSISelect Utility to Manage Arrays4 From the Options menu, select Configure/View SCSI Controller Settings and press Enter. 5 From the C

Seite 168

4-4Adaptec Ultra320 SCSI Cards User’s Guide7 After you enable HostRAID, you can select Configure/View HostRAID on the Options menu to create and maint

Seite 169 - Creating Driver Floppy

4-5Using the SCSISelect Utility to Manage Arrays Dead—One drive in a RAID 0 array is in failed state or missing. Building—the drive is a target of a

Seite 170 - Installation Options

4-6Adaptec Ultra320 SCSI Cards User’s Guide3 From the Main menu, press C to create a RAID array. Note: You must have at least two hard drives to creat

Seite 171 - Running Windows

4-7Using the SCSISelect Utility to Manage Arrays5 From the Select RAID Member menu, press the Spacebar to select the hard drives you want to use in th

Seite 172 - Running OpenServer

4-8Adaptec Ultra320 SCSI Cards User’s Guide4 Assign a RAID name by entering up to 15 alphabetic or numeric characters, then press Enter. The following

Seite 173 - Running DOS/NetWare

4-9Using the SCSISelect Utility to Manage Arrays3 After entering your options, if a partition exists on any of the selected drives, you will get a mes

Seite 174

vii7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the Software is furnished will be free from defects in materia

Seite 175 - Ultra320 SCSI to HostRAID

4-10Adaptec Ultra320 SCSI Cards User’s Guide4 With RAID 10 you have the option to create a maximum of two spare drives. You can create: two spares be

Seite 176 - Migrating With Windows 2000

4-11Using the SCSISelect Utility to Manage ArraysTo add a spare to an existing RAID 10 array, see Adding a Spare Drive on page 4-11.Deleting Arrays To

Seite 177 - Enabling HostRAID Support

4-12Adaptec Ultra320 SCSI Cards User’s Guide2 Select a drive and press Enter. Select Yes when the following message appears:Are you Sure?Ye s /N oAfte

Seite 178

4-13Using the SCSISelect Utility to Manage Arrays3 If your array rebuilds successfully, the following message appears:Build/Rebuild Completed.Press An

Seite 179 - Migrating With Windows XP

4-14Adaptec Ultra320 SCSI Cards User’s Guide3 You will get a message asking if you want to automatically fix errors. Press Yes to AutoFix. This will e

Seite 180

4-15Using the SCSISelect Utility to Manage ArraysBootable ArrayTo create a bootable array:1 From the Main menu, select array, press Enter, then press

Seite 181 - Migrating With Windows NT 4.0

5-15Installing the HostRAID Driver for Windows 2000, 2003, and XPIn this Chapter...This chapter explains how to install the Adaptec HostRAID software

Seite 182

5-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Device Driver for Windows To begin driver installation, see either, Installing the Driver Fo

Seite 183

5-3Installing the HostRAID Driver for Windows 2000, 2003, and XPInstalling the Driver When Windows 2000 or Windows Server 2003 is Already InstalledTo

Seite 184 - Migrating from HostRAID

5-4Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Windows XP is Already InstalledTo update or install the a320raid.sys driver if W

Seite 185

viiiShould you have any questions concerning this Agreement, you may contact Adaptec by writing to: Adaptec, Inc.Legal Department691 South Milpitas Bo

Seite 186 - Disabling HostRAID Support

5-5Installing the HostRAID Driver for Windows 2000, 2003, and XPChanging Boot ControllersIf you want to reconnect your bootable hard disk drive from t

Seite 187

6-16Installing the HostRAID Driver for Windows NT 4.0In this Chapter...This chapter explains how to install the Adaptec HostRAID software driver (a320

Seite 188

6-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver for Windows NT 4.0 To begin driver installation, see either Installing the Driver Whe

Seite 189

6-3Installing the HostRAID Driver for Windows NT 4.06 The screen displays the adapter drivers supported on the disk. Select Adaptec HostRAID U320 driv

Seite 190

6-4Adaptec Ultra320 SCSI Cards User’s GuideChanging Boot ControllersIf you want to reconnect your bootable hard disk drive from the SCSI controller to

Seite 191

6-5Installing the HostRAID Driver for Windows NT 4.0Boot Order In Windows NT 4.0 versus RAID ManagementDuring Windows NT 4.0 installation, Windows NT

Seite 192

7-17Installing the HostRAID Driver for LinuxIn this Chapter...This chapter explains how to install the Adaptec HostRAID driver for the following Linux

Seite 193

7-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling Red Hat Linux Installing the Red Hat Driver in a New Linux SystemTo install the Red Hat 8.0, 9.0

Seite 194

7-3Installing the HostRAID Driver for Linux14 If you intend to install other third-party devices, proceed with the installation of those devices. Othe

Seite 195 - Glossary-2

7-4Adaptec Ultra320 SCSI Cards User’s Guide9 After you enable HostRAID, you can select Configure/View HostRAID on the Options menu to create and maint

Seite 196 - Glossary-3

ixContents1 Introduction Ultra320 SCSI on the Adaptec SCSI Card 1-2Device Drivers 1-3HostRAID on Adaptec SCSI Cards 1-4HostRAID Features 1-4Storage Ma

Seite 197 - Glossary-4

8-18Installing the SCSI Driver For Windows 2000/2003 and XP In this Chapter...This chapter explains how to install the Adaptec Ultra320 SCSI driver fo

Seite 198 - Glossary-5

8-2Adaptec Ultra320 SCSI Cards User’s GuideIf you are performing a first-time Windows installation, see Installing the Driver When Installing Windows

Seite 199 - Glossary-6

8-3Installing the SCSI Driver For Windows 2000/2003 and XP9 If you have no other controllers to add, press Enter to continue with the Windows installa

Seite 200 - Glossary-7

8-4Adaptec Ultra320 SCSI Cards User’s GuideNote: When booting on an IA-64 system with an EFI BIOS, be sure to select the Microsoft Windows XP 64-bit E

Seite 201

8-5Installing the SCSI Driver For Windows 2000/2003 and XP12 Select the driver from the Adaptec provider that best fits your adapter, and click Next.

Seite 202

8-6Adaptec Ultra320 SCSI Cards User’s GuideInstalling a New Host Adapter When Windows 2000/2003 Is Already InstalledTo install a new host adapter afte

Seite 203

8-7Installing the SCSI Driver For Windows 2000/2003 and XP8 After completing the installation, select Finish.9 You will be prompted to restart the com

Seite 204

8-8Adaptec Ultra320 SCSI Cards User’s Guide3 Insert the new SCSI adapter into an available PCI slot, leaving the existing SCSI card intact.4 Turn on y

Seite 205

8-9Installing the SCSI Driver For Windows 2000/2003 and XPTroubleshootingMost problems can be resolved by following the recommendations in Problems an

Seite 206 - Milpitas, CA 95035 USA

9-19Installing the SCSI Driver for Windows NT 4.0 In this Chapter...This chapter explains how to install the Adaptec Ultra320 SCSI driver adpu320.sys

Kommentare zu diesen Handbüchern

Keine Kommentare