Adaptec ASA-7211C/F Installationsanleitung PDF herunterladen (Seite 28)

4-3

Creating an iSCSI-Bootable System

To create a single boot target entry, select

Target

Configuration >

Add Targets

and press

Enter

a For the target name, choose one of the following:

■ Type iSCSI as the target portal name. (recommended)

■ Leave blank, and the utility automatically uses iSCSI.

■ Enter the full iqn name.

b Specify an IP address for the target.

c Use the default for the port number, 3260, and verify that

Available after reboot is Yes .

7 Save settings.

8 Select Target Configuration > Rescan Targets and press Enter

to make the target you added in Step 6 visible in Step 9.

Select

Ta r g e t

Configuration

> Manage Targets > Available

Ta r g et s

and press

Enter.

Press

Enter

again to display target properties.

Select

Yes

for

Available After Reboot

and

Target Lo gi n.

Save settings.

Press

Esc

twice to return to the

Tar g et M e nu

14 Select Target Configuration > Boot Targets and press Enter.

Select the target you want to make bootable, and press

List of Boot LUNs is displayed.

16 Verify that the LUN you want to make bootable is listed first in

the boot order. If not, change the boot order accordingly.

Note: If the bootable target has multiple LUNs, only ONE

of the LUNs is actually bootable. The adapter

automatically uses the LUN listed first in the boot order.

17 Press Esc, then Y to save the boot order.

18 Press Esc three times, then Y when prompted to exit

iSCSISelect.

The computer will automatically restart.

ASA-7211 IG.book Page 3 Monday, February 2, 2004 10:33 AM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare

Adaptec ASA-7211C/F Installationsanleitung Seite 28

Kommentare zu diesen Handbüchern