Adaptec CDP-00278-02-A Betriebsanweisung PDF herunterladen (Seite 108)

3. To enable/disable auto-discovery, select Enable Auto Discovery. (This option toggles between

enabled and disabled.)

4. Update the auto-discovery settings, as needed:

• In the Auto Discovery Base Port eld, enter the port number for the auto-discovery task. You

can use any available port for auto-discovery. The default port is 34570. If you change the port,

you must restart the maxView Storage Manager Agent for the change to take effect.

• In the Auto Discovery Interval eld, enter the number of seconds between each auto-discovery

check. This number determines how often maxView Storage Manager checks for changes in

remote system resources. The default is 360 seconds.

5. Click OK to save the changes.

Clearing the Controller Conguration

You can clear the conguration of a controller, if needed, to accommodate changes in your storage

space. For example, you may want to clear a controller if you upgraded your hardware or if you plan to

move the controller to another machine. Clearing the conguration destroys the controller meta-data,

including logical device information, partition information, maxCache information, and so on. Once you

clear the controller conguration, your online data is no longer accessible.

Caution: When you clear a controller conguration, you lose all data stored on that

controller. Be sure you no longer need the data on the controller before proceeding.

To clear the controller conguration:

1. In the Enterprise View, select a system, then select a controller on that system.

2. On the ribbon, in the Controller group, click Clear Conguration.

A message window opens, warning that this operation destroys your data.

108Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00278-02-A Rev. A, Issue:

maxView Storage Manager User's Guide

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 132 133

Keine Kommentare

Adaptec CDP-00278-02-A Betriebsanweisung Seite 108