Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen PDF herunterladen (Seite 92)

Page 84 DocSTAR Level 2 Service Training Workbook

Replacing a cooling fan:

1. While the External RAID is running, unscrew the 2

Fan Door Screws and swing fan door open.

2. Disconnect power connector for failed fan.

Note: The other fans are still turning. Please use

caution when replacing fan.

3. Unscrew the 4 fan screws and replace fan.

4. Connect new fan power connector.

5. Close fan door and screw Fan Door Screws back

into place.

Replacing a Hard Drive:

1. While the External RAID is running, identify

which drive has failed by the RED LED

indicator.

2. Unlock the failed drive and slide the drive

carrier out as shown at right.

3. Replace hard drive with new hard drive of

same size or larger set as Master, as shown

below. Note: It is highly recommended

that the same model hard drive be used in

all drive bays, for performance reasons.

4. Slide drive carrier w/new hard drive back in

and lock the drive.

5. Rebuild to the spare is automatic and should

already have taken place or be in progress.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 112 113

Keine Kommentare

Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen Seite 92