Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen PDF herunterladen (Seite 94)

Page 86 DocSTAR Level 2 Service Training Workbook

Section 2: Adding RAID/Two-Tier Storage to a DocSTAR System

? This section will cover basic information about adding RAID/Two-Tier Storage to a

DocSTAR system

After the RAID hardware (and utility software for Internal RAID) is installed DocSTAR

software must be setup to use the Two-Tier storage system incorporating the RAID

device. The following requirements must be met for Two-Tier storage to work:

The system must be running DocSTAR software version 2.33 or higher

The license for Two-Tier storage must be programmed into the Hardware Key

Setting Up Two-Tier Storage to Work with DocSTAR

Two-Tier storage is a process whereby data is written to both an online media (RAID) and

an archive media (Optical Disk). In order for DocSTAR to use Two-Tier storage you must

setup Two-Tier storage in the DocSTAR Administration Program.

Select the ‘Paths’ button from the Administration program, as shown below:

The drive letter, in the Archive path shown above, must correspond to the drive letter of

the optical drive (DVD-RAM or Magneto-Optical drive). Then select the Two-Tier storage

button and you will see the following screen:

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 112 113

Keine Kommentare

Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen Seite 94