Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Installationsanleitung PDF herunterladen (Seite 109)

Creative Labs Sound Blaster Pro, Sound

Blaster Pro-2

Solaris Device Driver:

sbpro

Device Type:

Audio

Adapters:

Creative Labs Sound Blaster Pro,

Sound Blaster Pro-2

Bus Type:

ISA

Note - The features and interfaces that are supported by the Solaris sbpro driver

are described in the audio(7D) and sbpro(7D) man pages.

Preconﬁguration Information

The Sound Blaster Pro card cannot share IRQ settings with any other card

installed in your system. If the hardware-jumpered IRQ setting conﬂicts with any

other device, change the IRQ on the Sound Blaster card to one listed under

“Supported Settings.” The most common conﬂicts occur with the LPT1 parallel

port or a network card.

Output volume is controlled by software. Be sure the volume thumbwheel on the

back of the card is turned all the way up to the maximum volume setting;

otherwise you may not hear any sound.

The microphone jack on the back of the Sound Blaster Pro card is a mono jack. If

your microphone has a stereo plug, convert it to mono using an appropriate

adapter.

Supported Settings

If your card supports Plug and Play, your device resources are conﬁgured

automatically. Use the following settings for devices that don’t support Plug and Play.

Defaults are shown in this typeface.

Device Reference Pages 97

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 126 127

Keine Kommentare

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Installationsanleitung Seite 109