Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Installationsanleitung PDF herunterladen (Seite 17)

Some systems may have problems booting from IDE drives that are larger than

512 Mbytes, even though the install to the drive succeeds. Disable logical block

addressing, and reduce the CMOS geometry information for the drive to be less

than 1024 cylinders.

If you are using a Compaq LTE Elite 4/40 notebook, the system may hang when

changing from suspend mode to resume. To keep the ata driver from hanging

after being resumed, use any text editor to change the default value of the

timing_flags property (in the /platform/i86pc/kernel/drv/ata.conf

ﬁle) from 0x0 to 0x1 (that is, timing_flags=0x1). Then save the ﬁle and reboot

the system.

Note that the ﬁle contains an entry for the timing_flags property for both the

primary and secondary controllers. For the Compaq LTE Elite 4/40, you only have

to change the property for the primary controller.

The Compaq Professional Workstation 5000 includes a Compaq/Sanyo

CRD-168PCH ATAPI CD-ROM drive that is not recognized by the Solaris software

when you ﬁrst turn the machine on.

To work around this problem, before you attempt to install the Solaris software,

turn the machine on and press Control-Alt-Delete to reboot.

Device Reference Pages 5

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 126 127

Keine Kommentare

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Installationsanleitung Seite 17