Adaptec 6405 Betriebsanweisung PDF herunterladen (Seite 55)

2. Interrupt the autoboot, press the ESC key. The Device Conguration Assistant (DCA) Utility will open.

3. Select Apply driver updates.

4. Insert the driver disk or other update media, then press Return.

5. Complete the Solaris installation, following the instructions included with your operating system.

Installing with FreeBSD

Note: You will need your FreeBSD Installation CD to complete this task.

To install the Adaptec RAID controller driver while installing FreeBSD:

1. Insert the FreeBSD Installation CD.

2. Insert the USB driver disk.

3. Restart your computer. (Be sure to boot from the installation CD!)

4. When the FreeBSD start screen opens, select 2 for 'Escape to Loader Prompt'.

5. Type: load kernel

6. Type this command to locate the USB drive: lsdev

7. Assuming the USB drive is disk2s1, type this command:

load disk2s1:aacu.ko

8. Type this command: boot

9. Complete the FreeBSD installation, as usual. When nished, remove the installation CD, but not the

USB driver disk, then reboot.

Note: Be sure the system is congured to boot from the controller's bootable

array, not the USB drive!

10. To ensure that the driver is loaded automatically as a module at boot time, repeat Steps 4-7, then

complete the steps below.

11. Type this command to boot to the kernel: boot

12. Login as root, then type:

dmesg

13. Assuming the USB drive is da1s1, type this command to mount the drive:

mount -t msdosfs /dev/da1s1 /mnt

14. Install the driver package:

pkg_add /mnt/aac9x-amd64.tgz

Note: The distribution also includes driver packages for FreeBSD 8.

15. Reboot the computer.

Installing with VMware ESX 4.1

Note: Use the following procedure to install the controller driver with VMware ESX

4.1.

Note: You will need your VMware Installation CD to complete this task. You must

have root privileges to create and install the driver image.

To install the Adaptec RAID controller driver while installing VMware ESX 4.1:

1. Insert the VMware Installation CD.

2. Restart your computer.

3. Follow the on-screen instructions to begin the VMware installation.

55Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00277-02-A Rev. A, Issue:

Serial Attached SCSI RAID Controllers Installation and User's Guide

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare

Adaptec 6405 Betriebsanweisung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für RAID-Kontroller Adaptec 6405