
3-15
Storage Manager
The Array Group Information window displays the following
information:
Note: The availability of the various buttons depends on the
current configuration and state of the array.
The toolbar at the bottom of the Array Group Information window
contains the following buttons:
Name The descriptive name assigned to the array. An icon
in the upper right corner of the window indicates
the RAID level.
Address This is the logical device address used by the host
operating system to access the logical drive. The
address is the same as the lowest device address in
the array.
Capacity The total usable storage capacity of the array in MB.
Status The current status of the array as reported by the
controller.
Hotspares Displays a list of any hot spare drives that are
available to protect the array in the event of a drive
failure.
Components Displays the logical address, model, and stripe size
for each member of the array. If this is a multilevel
RAID Information window, the list displays the
address or name and stripe size for each disk array
that is a member of the multilevel RAID.
Event Log Displays the activity log of the RAID system. For
more information, see page 3-35.
I/O Stats Displays the log of the array’s I/O activity. For more
information, see page 3-49.
Verify Starts the process of checking the current status and
operability of the RAID array. For more information,
see page 3-48.
Expand Windows NT and Windows 2000 only—Allows setting
and checking the parameters of the RAID controller.
For more information, see page 3-21.
Kommentare zu diesen Handbüchern