Adaptec ICP5045BL Bedienungsanleitung PDF herunterladen (Seite 3)

contains complete installation information for the ICP

Storage Manager software.

--------------------------------------------------------------------

3. General Cautions

- While an array is being built or cleared, DO NOT remove and

reinsert any drive from that array. Doing so may cause

unpredictable results for any of the controller's arrays.

- While a drive is being cleared, DO NOT try to include it in a

new array. Doing so may cause unpredictable results.

- DO NOT move drives containing an array or volume from one

controller to another while the power is on. Doing so could

cause the loss of the array configuration or data, or both.

Instead, power off both affected controllers, move the drives,

and then restart.

--------------------------------------------------------------------

4. Known Limitations

4.1 Booting to a bootable CD

A system cannot boot to a bootable CD in a SCSI optical drive,

such as CD or DVD drive, connected to the ICP9024RO SCSI RAID

controller.

4.2 ICP9014RO/ICP9024RO controllers

Use only the utilities/flash tools included with this release.

Upgrade any existing tools to those included with this

release, as this release supports additional features that

were not available with previous releases

4.3 ICP9024RO controller

With an Intel Pro/1000 MT 32-bit PCI NIC on the system, after

controller POST the controller goes to a

BLED 0xEF NMI_HANDLER_FAILURE.

4.4 ICP9085LI controller

When the controller is connected to an external enclosure,

only the internal SAS connector closest to the bracket is

available for use with internal SAS or SATA disk drives. The

other internal SAS connector shares the SAS bus with the

external connector, which is occupied.

Various devices on the serial bus can negotiate at different

speeds. To determine the speed at which a particular device

is negotiating, view the device properties in ICP Storage

Manager. (Click on the device, then click the Properties

button.)

4.5 Using the controller in a Dell Precision 530

1 2 3 4 5 6 7

Keine Kommentare

Adaptec ICP5045BL Bedienungsanleitung Seite 3