Adaptec ICP5045BL Bedienungsanleitung PDF herunterladen (Seite 5)

Arrays may not be displayed correctly, even after you restart

your computer.

To resolve the problem:

As root, run 'resmgr -r -m vtoc' until it fails. Then, as

root, run '/etc/conf/bin/idconfupdate -f'. Then, reboot.

4.11 SAS and SATA controllers and Adaptec 335SAS enclosure

When the Adaptec 335SAS enclosure is attached to an ICP

SAS controller, such as ICP9085LI or ICP5085BR, the

enclosure numbering nomenclature starts with "0". For

example, if two Adaptec 335SAS enclosures are connected to an

ICP9085LI SAS controller, management tools such as Storage

Manager will denote the enclosures as "Enclosure 0" and

"Enclosure 1". When the Adaptec 335SAS enclosure is attached

to an Adaptec SATA controller, such as ICP9047MA or

ICP9087MA, the enclosure numbering nomenclature starts with

"14". For example, if two Adaptec 335SAS enclosures are

connected to an ICP9087MA controller, management tools such

as Storage Manager will denote the enclosures as

"Enclosure 14" and "Enclosure 15".

4.12 Using the ICP5085BR in a Gateway 920

When more than one ICP5085BR controllers are installed in a

Gateway 920 server, the system will not POST.

4.13 Creating an Array from the ICP Storage Manager CD

When you create an array with the ICP Storage Manager

bootable CD, the maximum size of the array is 2 TB.

4.14 Using the controller with an Adaptec S50 JBOD Enclosure

Temperature warnings from Adaptec S50 JBOD Enclosure (firmware

version T016) are not shown in Adaptec Storage Manager (or on

the enclosure).

4.15 SMART errors on SATA controllers

During POST, SMART errors for disk drives connected to SATA

controllers are indicated as follows:

o N = No SMART errors reported

o Y = SMART errors reported

o N/A = Disk drive does not support SMART error reports

4.16 Firmware upgrades

Check your controller BIOS settings after upgrading the

controller firmware/BIOS, as the BIOS may have been reset to

its default settings during the upgrade.

4.17 RAID 10/50/60 array leg limitations

1 2 3 4 5 6 7

Keine Kommentare

Adaptec ICP5045BL Bedienungsanleitung Seite 5