Adaptec AFW-1430 Bedienungsanleitung PDF herunterladen (Seite 17)

APSoft

CardBus FireWire Enabler for DOS 17

Control setting of VGA Enable bit in Bridge Control Register. Valid values are

0 and 1.

Example:

VGAEnabe = 0 Reset VGAEnabl bit

This option is used to mountain CardBus socket register/ExCA registers base

address register. Available values: any 32-bit hexadecimal number aligned to 4K

boundaries.

Example:

ExCABase = D8000000h

This is PC Card 16-Bit IF legacy mode base address. Available values: any 16-

bit hexadecimal number aligned to double-word boundary.

Example:

LegacyBase = 3e0h

These options control bus number assignments for PCI-to-PCI and CardBus

bridges. Available values: any decimal number not greater than 255.

Example:

[0:A:0] TI PCI1131 socket

PrimaryBus = 0

SecondaryBus = 1 Set sec. bus to 1

SubordinateBus = 3 Set sub. bus to 3

; Now socket 0 of TI PCI1131 CardBus adapter accepts

; I/O requests to buses from 1 to 3 inclusive

[0:A:1] TI PCI1131 socket

PrimaryBus = 0

SecondaryBus = 4 Set sec. bus to 4

SubordinateBus = 3 Set sub. bus to 3

Allows skip (ignore) particular CardBus socket . Valid values are 0 and 1

Example:

SkipSocket = 1 Skip socket

Allows ignore PCI-2-PCI bridge. This option may be used for subtractive-

decode PCI-2-PCI bridges (bridges which pass all memory and I/O requests

behind). Valid values are ON, OFF and AUTO. ‘ON’ means that bridge is

ignored (i.e. bridge is subtractive). ‘OFF’ means that bridge is not ignored (even

VGAEnable

ExCABase

LegacyBase

PrimaryBus,

SecondaryBus,

SubordinateBus

SkipSocket

IgnoreBridge

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Adaptec AFW-1430 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Adaptec AFW-1430