Adaptec AAA-UDMA Installationsanleitung PDF herunterladen (Seite 32)

3-6

AAA-UDMA Installation and Hardware Guide

Select array members. When the next screen appears, select

drives for the array by pressing the

↑

and

↓

keys until the drive

name is highlighted, and then press

Ins

Enter

. The names of

selected drives appear in the Adaptec Array # box.

To deselect the drive you most recently added, press

Del

Caution:

A warning appears if you select a disk that has par-

titions.

Do not

select a partitioned disk if it contains data you

want to keep, because any existing data will be erased when

the disk becomes part of an array.

When you have selected the number of drives you specified in

Step 8, the next screen appears automatically. If you are creat-

ing a RAID 1, RAID 0/1, or RAID 5 array, and if there are any

unassigned drives, the screen prompts you to define dedicated

spare drives for the array. (We recommend that you use a

spare

pool

instead of dedicated spares.)

Caution:

A spare must have at least the capacity of the small-

est drive in the array.

Select spares. If you do not want a spare, type

and continue

with Step 12. If you want to select dedicated spares, follow

these steps:

At the prompt, type

At the next prompt, type

Select one or two spares, using the same method you used

to select disks for the array.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 65 66

Keine Kommentare

Adaptec AAA-UDMA Installationsanleitung Seite 32