Adaptec GDTSETUP Bedienungsanleitung PDF herunterladen (Seite 73)

6WHS&RQILJXUH3K\VLFDO'HYLFHV

Now activate the menu Configure Physical Devices (level 1). A list appears showing all hard

disks found on the ICP Controller’s SCSI channels. If you have a ICP Controller with a dif-

ferent number of SCSI channels, the existing SCSI channels are displayed. Note: This

screen will always report all devices that are found to be connected to SCSI-cables, even

though GDTSETUP only allows you to work on Direct Access Devices (and therefore not on tape

drives, DATs, CD ROMs etc.).

The screen shows you:

 the channel to which a SCSI device is connected

 which SCSI-ID the drive has (the entry SCSI I/O Processor stands for the corresponding

SCSI channel of the ICP Controller. It has the default setting ID 7, as explained in chap-

ter B)

 the initialization status

 the SCSI names of the drives

 the Read-Write-Status. [RW] = Read + Write

 the gross capacity

 membership in a Logical, Array or Host Drive

Use the cursor keys n and p to select the drive you wish to initialize. We take the first drive

of channel A in the list. With this drive selected, press <ENTER>.

/HYHO

/HYHO

/HYHO

/HYHO

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 217 218

Keine Kommentare

Adaptec GDTSETUP Bedienungsanleitung Seite 73