Chapter 2: About Your HostRAID Controller l23
About the Adaptec 1225SA Controller
The Adaptec 1225SA is a low-profile PCIe to 2 external port SATA II HostRAID controller with
these features:
Note:
Adaptec 1225SA controller does not support bootable devices.
Note: There is no separate I2C connector. See the HostRAID Controller LED and I2C Connector
Reference on page 87 for details.
Form factor Low-profile
Bus compatibility PCIe-X1
Ports 2 external SATA ports
You can also connect one SATA drive
enclosure with a port multiplier. For details
about supported port multipliers, refer to
HostRAID Controller Features on page 15.
Connector, internal 0
Connector, external 2 external SATA connectors
RAID levels 0, 1 and 10
Simple Volume Yes
Disk drives SATA II (3.0Gbps) NCQ-enabled drives or
eSATA drives.
Maximum number of disk drives 2
Hot spares Yes
Enclosure support Yes—for port multiplier enclosures.
Native Command Queuing (NCQ) Yes
Audible alarm No
Mounting bracket
PCIe X1 connector
External SATA connectors
J1 LED Connector
Kommentare zu diesen Handbüchern