Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen PDF herunterladen (Seite 32)

Model PDP Series 200 maxDPU4E Hardware Guide

2. Place the DPU4E mode switch in the “C” position.

3. Press the reset button on the DPU to be serial downloaded. Make sure

that the key switch is halfway between valid positions to allow a hard

reset to take place.

4. Wait for the Serial 1 LED to light on the DPU to signify that it is ready

for download.

5. Boot the PC to DOS. Do not open a DOS window from within MS

Windows.

6. Move the nk.bin and serflsh.exe files into the same directory, if they are

not there already. Locate the serflsh.exe on the release CD in the

directory \DPU4E IOM & BIOS\Serial Flash. The nk.bin should be the

latest that is to be downloaded. If the maxSTATION has been updated

the file can be found in c:\mcs\setup. It is also on the CD in the directory

\Release Update for DPU4E.

7. Change the current directory to the directory that contains the two files

and enter the command serflsh n nk.bin. Where n is the number of the

serial port connection on the PC (e.g., serial port 1 or serial port 2)

8. The download program will display some informational messages and

then output a sequence of dots on the screen while the actual download is

taking place. The dots represent progress during the download. This

program can take approximately one hour depending on the CE image

size.

9. After the download completes, set the DPU4E mode switch to “F”.

10. Press the reset button on the DPU. Make sure that the key switch is

halfway between valid positions to allow a hard reset to take place. After

the reset, move the key switch back to the desired position.

11. After the DPU boots, verify that its date and time are correct.

The serial flash download is now completed.

Metso Automation MAX Controls Inc. • 278590 •

5-4

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Keine Kommentare

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Spezifikationen Seite 32