Adaptec 2200S - SCSI RAID Controller Installationsanleitung PDF herunterladen (Seite 10)

1-5

Introduction

Adaptec SCSI RAID controllers support:

■ RAID levels 0, 1, 5, multilevel 10 and 50, and joining of available

space from connected drives into a logical volume.

■ Cache memory with Error Correcting Code (ECC).

■ PCI Local Bus Specification, Revision 2.2, with PCI clock speeds up

to 66 MHz.

■ Microsoft Windows® 2000, Windows® NT, Windows® XP,

Novell NetWare, SCO OpenServer, OpenUNIX, Red Hat Linux,

and SuSE Linux.

■ Operating system independent configuration and RAID

creation using Adaptec RAID Configuration (ARC).

■ Local and remote configuration, array status, and I/O

monitoring using Adaptec Storage Manager - Browser Edition.

■ Intelligent Hot Spares that automatically replace failed drives.

Hot Spares may be assigned to a specific array or globally. In the

event of a drive failure of a component of a redundant array,

that component will be rebuilt automatically onto a Hot Spare.

■ Flash ROM for easy upgrades of controller firmware.

■ Event logging and event mail notification.

■ RAID Level migration wherein a RAID may be changed from

one level to another without compromising the data.

■ Novell NetWare, Windows 2000, Windows NT, and Windows XP

only—Online Capacity Expansion (OCE) and extension during

normal operation on RAID 0, RAID 10, RAID 5, or RAID 50

arrays with the NTFS file system. Refer to the Adaptec SCSI

RAID Software User’s Guide for specific information.

■ Ultra 2 and above SCSI drives (including hard disk, tape,

CD-ROM, CD-RW, and Magneto-Optical drives) and jukeboxes.

See Mixing Devices on a Channel on page 2-3 for more details.

■ Multimode termination.

■ SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) and SES

(SCSI Enclosure Services) enclosure support.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Keine Kommentare

Adaptec 2200S - SCSI RAID Controller Installationsanleitung Seite 10