Adaptec 2200S - SCSI RAID Controller Installationsanleitung PDF herunterladen (Seite 30)

2-11

Installing The Controller

Press Esc until the Exit Utility window appears. Highlight Yes,

then press Enter. The system will restart. If an operating system

needs to be loaded, it may be loaded using the normal

installation instructions for that operating system onto the

RAID 5 as a single drive.

You will need to load the appropriate driver for the Adaptec

SCSI RAID controller card to support that operating system

once the operating system is installed.

Using the Adaptec Bootable CD

Insert the CD and start the system.

Note:

During the system start, you may need to enter the

system’s BIOS settings and enable booting from the CD.

Other settings may be needed if this system has been

configured to operate without a display of input devices.

Select the appropriate language on the Language screen, press

Enter. Read the information on the Licenses screen, then press

Enter again.

After a number of seconds, the system will display the

Adaptec Bootable CD Main Menu. Select the option

Launch Configuration Utility.

The system will start Mozilla as a browser and launch Adaptec

Storage Manager-Browser Edition.

On the Storage Manager screen that appears, click on the

next to the drive icons shown on the left side of the screen. The

drive icons will now be shown one per line underneath one

another.

Click the Create button on the right side of the screen. The

display will expand to include a yellow Create area, starting

with step 1 of 3.

In step 1 of 3, click the RAID 5 button, then Next.

In step 2 of 3, click the three drives to be used in your RAID 5 on

the left side of the screen. Each selected drive will have a

checkmark. Click Next.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Keine Kommentare

Adaptec 2200S - SCSI RAID Controller Installationsanleitung Seite 30