Adaptec ULTRA160 Betriebsanweisung PDF herunterladen (Seite 50)

4-10

Ultra160 Family Manager Set User’s Guide

lun_enable=

0-FF 01 A bit mask to enable

scanning for specific

LUNs on all targets. The

default value of 01 causes

the driver to scan LUN 0

only. This enable bit mask

is entered in hex (see Bit

Mask Options on

page 4-11.)

max_tags= 1-128 16 Specifies maximum

number of tagged

commands per device.

multlun_targets= 0-FFFF FFFF A bit mask to enable

LUNs on selected targets.

By default, LUNs on all

targets are enabled. This

bit mask is entered in hex

(see Bit Mask Options on

page 4-11).

slot= 0-xxxx

0 Defines a physical slot

number for the host

adapter. If 0 is specified, or

if this option is not

specified, then the driver

loads for all Ultra160

Family host adapters.

verbose= yes, no no Displays host adapter

configuration information

at load time.

Many multiple-LUN and removable-media devices are changers or magazines.

Some of these are only supported by the driver through an ASPI driver provided by

the hardware vendor.

The values can vary and are dependent on the system configuration.

Option Values Default Description

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 77 78

Keine Kommentare

Adaptec ULTRA160 Betriebsanweisung Seite 50