Adaptec ULTRA160 Betriebsanweisung PDF herunterladen (Seite 54)

4-14

Ultra160 Family Manager Set User’s Guide

When

sbackup

is loaded, it asks for a login name. Enter the

appropriate name.

sbackup

asks you to select the device driver, select the

DIBI-2 Tape Driver, regardless of the type of SCSI tape drive

being attached (e.g., even if the tape drive is manufactured by

Wan gte k, do not select the Wangtek driver).

Note:

Novell also includes a driver called

adaptec.nlm

This driver is not needed and should not be loaded.

Adaptec’s driver module takes advantage of ASPI

interface features bypassed by

adaptec.nlm

Novell publishes a list of SCSI tape drives supported by

sbackup.nlm

Using a CD-ROM with NetWare

To use a CD-ROM with NetWare, follow these instructions:

Load

adpt160m.ham

by entering the following line:

:load [

pathname

]adpt160m

The

scsicd.cdm

driver will auto-load if the device(s) are

detected.

Note:

For multiple LUN CDs, enable multiple LUN

scanning with the lun_enable switch (e.g., load

adpt160m lun_enable=FF). The lun_enable switch is

needed for

adpt160m.ham

Enter the following line at the prompt:

scan all luns

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 77 78

Keine Kommentare

Adaptec ULTRA160 Betriebsanweisung Seite 54