Adaptec SAS RAID Controllers Installationsanleitung PDF herunterladen (Seite 26)

12 Sun StorageTek SAS RAID HBA Installation Guide • March 2010

FIGURE 2-3 Internal Mini-SAS, Which Connects to SAS or SATA Disk Drives on a

Backplane

5. If you are installing the HBA into a full-height computer chassis, replace the

original low-profile bracket with the full-height bracket included in the HBA

ship kit.

Caution – Handle the HBA by its bracket or edges only.

6. Choose your installation option.

You can choose to create a bootable array and then install an operating system

and the HBA driver on that array, or you can complete a standard installation,

where the HBA driver is installed on an existing operating system.

Installation Task Map

You can choose either of these installation options:

■ “To Install the OS Onto a Bootable Array” on page 12

■ “To Install on an Existing Operating System” on page 14

▼ To Install the OS Onto a Bootable Array

1. Install the battery backup module (BBU).

See “Installing the Battery Backup Module” on page 14.

2. Install and connect the HBA and disk drives.

See “Installing the HBA” on page 17.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 147 148

Keine Kommentare

Adaptec SAS RAID Controllers Installationsanleitung Seite 26