Adaptec AHA-1540CP Betriebsanweisung PDF herunterladen (Seite 23)

2-5

Microsoft Windows NT Installation

Installing the Driver When Windows NT

is Already Installed

To update or install the

aic78xx.sys

aic78u2.sys

driver if Windows

NT is already installed, follow the instructions below for the version of

Windows NT you are installing.

Updating Windows NT 3.5x

Select and start the Windows NT Setup program. (Its icon is usually

found in the Main program group.) There is a brief pause while

Windows NT Setup scans your hardware configuration.

Select the Options pull-down menu and then select Add/Remove

SCSI Adapters. The SCSI Adapter

setup

program displays a list of

all host adapters currently installed.

Click the Add button to add another host adapter type to the list. A

list of additional SCSI adapters appears.

Expand the list of additional SCSI adapters; select Other and press

Enter. (Requires disk provided by the hardware manufacturer.)

Insert the Adaptec 7800 Family Manager Set diskette for Windows

NT into drive A

;

enter one of the following paths to the installation

files and then click OK.

a:\winnt\3_5)

The screen displays the adapter drivers supported on the diskette:

Adaptec AHA-290x/291x/294x/4944/AIC-78xx PCI SCSI

Controller (NT 3.5x)

Adaptec AHA-294xu2/AIC-7890/91 PCI Ultra2 SCSI Controller

(NT 3.5x)

Highlight a driver, then click OK. The driver is added to the list of

SCSI adapters.

Select the driver from the list of SCSI adapters and click Install.

At this point, Windows NT Setup checks to see if the specified driver

has already been copied to the system disk.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 119 120

Keine Kommentare

Adaptec AHA-1540CP Betriebsanweisung Seite 23