Adaptec AHA-1540CP Betriebsanweisung PDF herunterladen (Seite 60)

4-14

Adaptec 7800 Family Manager

Mount Status

Mounting causes a drive to come online as a NetWare storage device.

Dismounted drives are inactive and cannot be accessed.

Before you eject your current media, you should first dismount it (menu

choice 5). When the media status is dismounted, you can eject the media.

However, NetWare does not allow you to dismount it if the media is locked.

To insert your new media, wait for the drive to spin-up, and then select the

Drive Mount option.

Lock Status

If your removable-media device supports the Lock/Unlock feature, you can

lock the media (menu choice 6). The media must be in the Not Locked state

before you can eject it. If the media is Locked, it cannot be ejected when

you press the Eject button.

Verify (

aic7870.dsk

driver only)

Read After Write Verify (menu choice 2) is set to Hardware Level by

default. The option can also be set on the command line, see Using the

Load Command Line Options on page 4-7.

The available options are defined as follows:

Read After Write Verify

Option

Setting Function

Disabled All writes to SCSI disk drives are with the SCSI Write

command (2Ah).

Hardware

Level

All writes to SCSI disk drives are with the SCSI Write

and Verify command (2Eh). If not supported by the

drive, behavior is the same as if Read After Write

Verify is disabled. We recommend this setting for best

data security.

Software

Level

Not supported.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 119 120

Keine Kommentare

Adaptec AHA-1540CP Betriebsanweisung Seite 60