Adaptec AHA-1540CP Betriebsanweisung PDF herunterladen (Seite 71)

5-5

IBM OS/2 Installation

4 For each driver removed from the OS/2 diskette #1, remove its

corresponding line in the

config.sys

file (also on OS/2 diskette #1).

For example, if you deleted all Adaptec drivers, as explained in Step

2a, above, remove the following lines from the

config.sys

file:

basedev=aha152x.add

basedev=aha154x.add

basedev=aha164x.add

basedev=aha174x.add

basedev=aic7770.add

basedev=fd16_700.add

5 In the

config.sys

file on OS/2 diskette #1, add the following line:

set copyfromfloppy=1

This line must be added so that the install process copies the

aic7870.add

aic78u2.add

driver from the OS/2 diskette #1,

instead of the

aic7870.add

driver included on your OS/2 CD-ROM.

Note:

For OS/2 Warp 4.0 or 4.0 SMP users only, add the

basedev=aic7870.add or basedev=aic78u2.add line to

the top line of the

config.sys

file on OS/2 diskette #1. This

will result in two basedev=aic7870.add or

basedev=aic78u2.add statements existing in the

config.sys

file.

6 Run the OS/2 installation program; follow the instructions in your

OS/2 documentation until you reach the System Configuration

window.

7 In the System Configuration windows, click the SCSI Adapter

Support icon.

8 Deselect any highlighted adapters (including the Adaptec 294x, 394x,

AIC7870 PCI SCSI), and click OK. The text box for SCSI Adapter

Support should say None.

Note:

If these adapters are not deselected, the driver

included on the CD-ROM will be copied over the driver

being installed.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Adaptec AHA-1540CP Betriebsanweisung Seite 71

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Adaptec AHA-1540CP