Adaptec AHA-1540CP Betriebsanweisung PDF herunterladen (Seite 37)

2-19

Microsoft Windows NT Installation

[xxxxx089]

Unable to allocate memory. This indicates that there may be a problem with

the amount of memory installed in your system. Verify that your system has

at least the minimum amount of memory required by your operating

system.

[xxxxx096]

Adapter hardware initialization failure—possible resource conflict. The

driver has attempted to initialize the adapter hardware but failed. This

might suggest that the adapter resources (e.g., IRQ) conflict with another

board installed in your system.

[xxxxx097]

Unable to allocate memory. This indicates that there may be a problem with

the amount of memory installed in your system. Verify that your system has

at least the minimum amount of memory required by your operating

system.

[xxxxx0af]

Unable to de-allocate memory that was allocated for a target device.

Normally, this is not a serious problem, unless you get this message

frequently over a short period of time. The memory can be reclaimed by

rebooting the system.

[xxxxx0ce]

Scatter Gather Limit exceeded. An I/O request packet from the system

contained a Scatter Gather element list that contained more elements than

are supported by the miniport. Scatter Gather is a list of data segments that

define the entire data transfer. Scatter Gather is a means to improve total

data throughput. This error might be caused by a component external to the

miniport driver, such as the operating system or an ASPI application.

[xxxxxd4]

Adapter hardware failure - adapter reset. The host adapter hardware failed

and the miniport has to reset the hardware.

[xxxxx0d6]

Internal driver error. An error has occurred while the driver was setting up

its internal data structures. Try installing the most up-to-date version of the

driver available from the Adaptec Web site or BBS.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 119 120

Keine Kommentare

Adaptec AHA-1540CP Betriebsanweisung Seite 37