Adaptec AHA-1540CP Betriebsanweisung PDF herunterladen (Seite 30)

2-12

Adaptec 7800 Family Manager

Using Windows NT and the Host

Adapter

This section contains useful information on using Windows NT and your

host adapter.

Removing a Host Adapter

Removing a host adapter can be as simple as physically removing it from

the slot when your computer is shut down. Windows NT boots and

functions properly in this configuration, but a warning message is generated

every time you boot Windows NT.

Caution:

If you have removed a host adapter but still have other

host adapters of the same type installed in your computer, do not

use Windows NT Setup to remove the device driver.

To eliminate the warning message, you must update the Windows NT

software configuration, as described below:

Removing a Host Adapter in Windows NT 3.5x

Start the Windows NT Setup program. There is a brief pause while

Windows NT Setup scans your hardware configuration.

Select the Options pull-down menu and then select Add/Remove

SCSI Adapters. The SCSI Adapter

setup

program displays a list of

all host adapters currently installed.

Select the host adapter you want to remove and click the Remove

button. When the Windows NT Setup program asks you for

confirmation, click OK.

Because SCSI device drivers are loaded during system bootup and

because they may be needed to load Windows NT itself, a screen may

appear warning you that Windows NT may not start if you remove

the SCSI adapter.

If you are sure you are removing the correct host adapter type, click

OK.

Return to Step 3 to remove driver support for other types of host

adapters, or click Close to exit the SCSI adapters portion of Windows

NT Setup.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 119 120

Keine Kommentare

Adaptec AHA-1540CP Betriebsanweisung Seite 30