Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Installationsanleitung PDF herunterladen (Seite 39)

Wall mounting the SIERRA™ plus film digitizer 37

VIDAR Film Digitizer Installation Guide

3. Attach the mounting bracket to the wall.

WARNING

Only a qualified building maintenance technician can attach the

mounting bracket to a wall. Wall mounting of the digitizer must

meet all applicable building codes.

Wall mounting requires the use of four wall anchors

(supplied by the customer), each of which must be rated for

at least 30 pound load capacity.

VIDAR Systems Corp. is not liable for any damages or injuries

to persons or property associated with improper installation or

use of the digitizer.

Taking into account...



Space requirements (step 1 in this chapter) and



Height above the floor (step 2 in this chapter) and



That the bracket must be level (use a carpenter’s level)...

Attach the mounting bracket to a permanent wall using four wall anchors

rated for at least 30 pounds each.

Use carpenter’s level to assure mounting

bracket is horizontal—

films will not feed

properly if mounting bracket is tilted

Use these four holes for wall mounting

Wall anchors (4)

and screws (4)

supplied by

customer

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Keine Kommentare

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Installationsanleitung Seite 39